Climate Insights for Base Wafer

The climate in Base Wafer is hot. The average annual temperature is 26°C and approximately 3,844 mm of precipitation falls per year. Base Wafer receives a notable amount of rainfall throughout the year, including during its driest month. Base Wafer sits near the equator, so seasonal temperature differences are minimal throughout the year.The climate in Base Wafer is hot. The average annual temperature is 80°F and approximately 151.3 in of precipitation falls per year. Base Wafer receives a notable amount of rainfall throughout the year, including during its driest month. Base Wafer sits near the equator, so seasonal temperature differences are minimal throughout the year.

Base Wafer has relatively stable temperatures year-round, staying within a 3°C range. The warmest month is March, when average highs reach 28°C and the mean temperature sits around 27°C. November is the coolest month, with minimum temperatures around 25°C and an average of 26°C. Daily temperature variation is modest, with an average difference of 1°C between highs and lows.Base Wafer has relatively stable temperatures year-round, staying within a 5°F range. The warmest month is March, when average highs reach 83°F and the mean temperature sits around 81°F. November is the coolest month, with minimum temperatures around 78°F and an average of 78°F. Daily temperature variation is modest, with an average difference of 2°F between highs and lows.

Base Wafer is a very wet location, receiving approximately 3,844 mm of precipitation annually, which averages out to around 320 mm per month. The wettest month is May, averaging 533 mm of rainfall. August and June also tend to see above-average precipitation. The driest month is February, with just 87 mm. That's 446 mm less than May, the wettest month. Rainfall is heavily concentrated in certain months, creating a distinct wet and dry season. Visitors should plan around these patterns, as the difference between peak and low months is dramatic.Base Wafer is a very wet location, receiving approximately 151.3 in of precipitation annually, which averages out to around 12.6 in per month. The wettest month is May, averaging 21 in of rainfall. August and June also tend to see above-average precipitation. The driest month is February, with just 3.4 in. That's 17.6 in less than May, the wettest month. Rainfall is heavily concentrated in certain months, creating a distinct wet and dry season. Visitors should plan around these patterns, as the difference between peak and low months is dramatic.

Base Wafer is mildly breezy, with an average annual wind speed of 16km/h. For context, sustained winds below 12km/h are generally light, while anything above 25km/h is considered strong. The windiest month is October, averaging 23km/h, noticeable enough to affect lighter outdoor activities. The calmest conditions occur in March, with average winds dropping to 8km/h, making it an ideal period for wind-sensitive activities. Wind speeds vary significantly across the year, with a 15km/h difference between the calmest and windiest months. This level of variation is worth factoring into travel plans. Wind tends to pick up during the summer months. The seasonal averages are 11km/h in winter, 12km/h in spring, 19km/h in summer, 21km/h in autumn.Base Wafer is moderately windy, with an average annual wind speed of 10mph. For context, sustained winds below 7mph are generally light, while anything above 16mph is considered strong. The windiest month is October, averaging 14mph, which can feel quite blustery and may affect outdoor activities. The calmest conditions occur in March, with average winds dropping to 5mph, making it an ideal period for wind-sensitive activities. Wind speeds vary significantly across the year, with a 9mph difference between the calmest and windiest months. This level of variation is worth factoring into travel plans. Wind tends to pick up during the summer months. The seasonal averages are 7mph in winter, 7mph in spring, 12mph in summer, 13mph in autumn.

The table below shows monthly climate averages for Base Wafer based on historical weather data. Min and max temperatures represent typical overnight lows and afternoon highs for each month, shown in degrees Celsius (°C). Precipitation is measured in millimetres (mm) and indicates the average total rainfall per month. Wind speed is the average sustained speed in kilometres per hour (km/h). All values are based on averages from over 10 years of historical weather data. The current month is highlighted for quick reference.The table below shows monthly climate averages for Base Wafer based on historical weather data. Min and max temperatures represent typical overnight lows and afternoon highs for each month, shown in degrees Fahrenheit (°F). Precipitation is measured in millimetres (mm) and indicates the average total rainfall per month. Wind speed is the average sustained speed in miles per hour (mph). All values are based on averages from over 10 years of historical weather data. The current month is highlighted for quick reference.